6 dBi Gain, 28 GHz, 50 x 95° Beamwidth, SMPM (M) Connector, 4 x 16, Ka-Band Microstrip Patch Array Antenna

6 dBi Gain, 38.5 to 39.5 GHz, 2.4 mm (F), Ka-Band Microstrip Patch Array Antenna

27 dBi Gain, 34.75 to 35.25 GHz, Ka-Band, Weather Resistant, WR-28 Slotted Waveguide Array Antenna

27 dBi Gain, 34 to 36 GHz, 4.02" Reflector Diameter, Ka-Band, WR-28 Waveguide Monopulse Cassegrain Antenna

3 dBi Gain, 26.5 to 40 GHz, Ka-Band, WR-28 Waveguide Omnidirectional Antenna

30 dBi Gain, 26.5 to 40 GHz, 2.92 mm (F), Ka-Band Omnidirectional Amplified Antenna

15 dBi Gain, 24 to 42 GHz, 35 dB Isolation, WR-28 Dual-Polarized Scalar Feed Horn Antenna

24 to 42 GHz, 40 dB Isolation, 35 dB Cross Polarization, 0.328" Diameter Circular Waveguide Antenna Port, Ka-Band Orthomode Transducer

71 to 86 GHz, 1.1 Axial Ratio, 0.110" Diameter Circular Waveguide, E-Band Linear to Circular Polarizer

18 to 42 GHz, 28 dB Gain, +15 dBm P1dB, 4.0 dB Noise Figure, 2.92 mm (F), Broadband Amplifier

75 to 110 GHz, 35 dB Gain, 5.0 dB Noise Figure, In-line WR-10 Waveguide, W-Band Low Noise Amplifier

31 to 38 GHz, 40 dB Gain, +34 dBm P1dB, 2.92 mm (F), Ka-Band Power Amplifier

11 to 40 GHz, DC to 10 GHz IF, +15 dBm LO Power, 2.92 mm (F), Wideband Balanced Mixer

30 to 50 GHz, DC to 2 GHz IF, +17 dBm LO Power, 2.4 mm (F), Broadband Quadrature Mixer

60 to 90 GHz, DC to 30 GHz IF, +13 dBm LO Power, WR-12 Waveguide, E-Band Balanced Mixer

60 to 90 GHz, +16 dBm Output Power, WR-12 Waveguide, E-Band, X8 Active Frequency Multiplier

28 GHz, +15 dBm Output Power, 2.92 mm (F), Ka-Band Internally Referenced Phase Locked Oscillator, Limited Run

94 GHz, ±500 MHz Tuning Bandwidth, +17 dBm Output Power, WR-10 Waveguide, W-Band Bias Tuned Gunn Oscillator

94 GHz, ±3.00 GHz Varactor Tuning Bandwidth, +13 dBm Output Power, WR-10 Waveguide, W-Band Varactor Tuned Gunn Oscillator

0.2 to 20 GHz, -20 to +13 dBm Output Power, SMA (F), Frequency Synthesizer Module

26.5 to 40 GHz, 15 dB Isolation, WR-28 Waveguide, Ka-Band, High Power Full Band Junction Circulator

71 to 76 GHz, 18 dB Isolation, WR-12 Waveguide, E-Band Junction Isolator

18 to 40 GHz, 37 dB Attenuation, 2.92 mm (F) RF Ports, SMA (F) Bias Port, Broadband High Dynamic Range Electrical Attenuator

30 to 40 GHz, 30 dB Isolation, 2.92 mm (F), Absorptive SPST PIN Diode Switch

0.5 to 43 GHz, 60 dB Isolation, 2.92 mm (F), Broadband Absorptive SP4T PIN Diode Switch

0.5 to 40 GHz, 50 dB Isolation, 2.92 mm (F), Absorptive SP8T PIN Diode Switch

27 to 40 GHz, 20 dB Port Isolation, WR-28 Waveguide, Ka-Band, 2-Way Right Angle Power Divider

50 to 75 GHz, 20 dB Port Isolation, WR-15 Waveguide, V-Band, 2-Way In-line Power Divider

10 to 40 GHz, 2.92 mm (F), 8-Way Coaxial Power Splitter

18 to 40 GHz, 2.92 mm (F) Input/Output Ports, 3 dB Coupling, 90 Degree Coaxial Hybrid Coupler

33 to 50 GHz, 30 dB Sum and Difference Port Isolation, 20 dB Collinear Port Isolation, WR-22 Waveguide, Q-Band Magic Tee

50 to 75 GHz, 10 dB Coupling, 40 dB Directivity, WR-15 Waveguide, V-Band, 3-Port Directional Coupler

10 dB Coupling, 1 to 50 GHz, 2.4 mm (F), 50 Watts, Coaxial Directional Coupler

24.25 to 25.25 and 36.25 to 40 GHz Dual Passband, 40 dB Rejection from DC to 23.8, 27 to 35.5 GHz, and 42 to 49 GHz, Ka-Band, WR-28 Waveguide Dual Bandpass Filter

DC to 33 GHz, 25 dB Rejection from 37 to 50 GHz, 2.92 mm Coaxial Lowpass Filter

WR-28 Waveguide to 2.92 mm (F), Right Angle, WR-28 Waveguide to Coax Adapter

WR-28 Waveguide to 2.92 mm (M), End Launch, WR-28 Waveguide to Coax Adapter

WR-19 Rectangular to WR-10 Rectangular Waveguide, Waveguide Taper Transition

50 to 75 GHz, 0.5 W Power Handling, WR-15 Waveguide, V-Band Fixed Termination Load

W-Band, 75 to 110 GHz, 2", WR-10 Waveguide Straight Section

150 mm (5.91"), Grooved Flange, WR-28 Flexible Twistable Waveguide Section (Flexguide)

WR-12 Waveguide, E-Band, 1.25" Insertion Length, 90° Waveguide Twist

Ka-Band, Ø12 Mil Pin, 0.48” Mounting, WR-28 Uni-Guide™ Waveguide Connector

DC to 110 GHz, 1.0 mm (M) to 1.0 mm (M), Coaxial Adapter

DC to 100 GHz, SMPS (G3PO) (F) to 1 mm (M), Coaxial Adapter

20 dB Attenuation, 1.85 mm (M) to (F), DC to 67 GHz, 2 Watt, Coaxial Fixed Attenuator

DC to 67 GHz, 0.5 Watt, 1.85 mm (M) Metrology Grade Coaxial Matched Load

2.4 mm, 10 MHz to 50 GHz, Inner Coaxial DC Block

30 kHz to 40 GHz, 750 mA DC Current, 25 dB Isolation, 2.92 mm (F) Bias Tee

DC to 110 GHz, 1 mm (M) to 1 mm (M), 3" Flexible, High Performance Coaxial Cable Assembly

DC to 110 GHz, 1 mm (M) to 1 mm (M), 6" Semi-Rigid, High Performance Coaxial Cable Assembly

92 to 96 GHz, 4 dB Noise Figure, 30 dB RF to IF Conversion Gain, W-Band Dual Channel Receiver

75 to 110 GHz, 14 dB Noise Figure, 30 dB Gain, W-Band Receiver

92 to 96 GHz, 0 dBm LO Input Power, 11 GHz LO Frequency, Dual Channel, W-Band Transmitter

54 to 64 GHz, 34 dBm EIRP, V-Band Transmitter Sub-Assembly

76 to 78 GHz, 0 dBm IF Input Power, -30 dBm Minimum Transmit Output Power, E-Band Transceiver

14 dBi Gain, 4.5 to 50 GHz, 2.4 mm (F), Broadband Double-Ridged Horn

8 dBi Gain, 1 to 4 GHz, 20 dB Isolation, SMA (F), Dual-Polarized Quad-Ridged Horn

17 dBi Gain, 18 to 40 GHz, 30 dB Isolation, 2.92 mm (F), Broadband Quad-Ridged, Dual-Polarized Horn

13 dBi Gain, 60 to 90 GHz, 35 dB Isolation, WR-12 Waveguide, E-Band, WR-12 Dual-Polarized Scalar Feed Horn Antenna

10 dBi Gain, 50 to 75 GHz, 40 dB Isolation, V-Band, WR-15 Dual-Polarized Choke Flange Feed Horn Antenna

60 to 90 GHz, WR-12 Waveguide Rotary Joint

5", Ka-Band, Specialized Omnidirectional Antenna Mounting Fixture

75 to 110 GHz RF Input, 6 GHz to 41 GHz IF Output, WR-10 Waveguide, W-Band Down-converter