- *By Application
- *Services
- Adapters & Transitions
- Amplifiers
- Antenna Feeds
- Antenna Measurement Systems & Accessories
- Antennas
- Attenuators
- Bias Tees
- Cable Assemblies
- Calibration Kits
- Corner Reflectors
- Couplers
- DC Blocks
- Detectors
- Ferrite Devices
- Filters
- Frequency Converters
- Frequency Multipliers
- Limiters
- Magic Tees
- Mixers
- Noise Sources
- Oscillators
- Phase Shifters
- Power Dividers
- Proxi-Flange™ Contactless Flange
- Radar Sensors
- Subassemblies
- Switches
- Termination Loads
- Test Equipment
- Balanced Harmonic Mixers
- Frequency Down Converters
- Frequency Extenders
- Frequency Up Converters
- Keysight PNA-X Noise Figure Extenders
- Noise Figure and Gain Test Extenders
- Phase Noise Analyzer Down-Converters
- Programmable & Manual Rotary Vane Attenuators
- Scalar Network Analyzer Extenders
- Spectrum Analyzer Harmonic Mixers
- VNA Frequency Extenders
- White Noise Generators
- Test Hardware & Accessories
- TX/RX Modules
- Uni-Guide™ Waveguide Connector
- VNA Frequency Extenders
- Wave-Glide™ VNA Rail System
- Waveguide Sections
55 Products
Filter By
Waveguide Bends
55 Results
WR-03 Waveguide, J Band, 0.75" Bend Radius, 90° E-Plane Waveguide Bend, Precision Machined
WR-03 Waveguide, J Band, 0.75" Bend Radius, 90° H-Plane Waveguide Bend, Precision Machined
WR-05 Waveguide, G Band, 0.75" Bend Radius, 90° E-Plane Waveguide Bend, Precision Machined
WR-05 Waveguide, G Band, 0.75" Bend Radius, 90° H-Plane Waveguide Bend, Precision Machined
WR-06 Waveguide, D Band, 0.75" Bend Radius, 90° E-Plane Waveguide Bend, Precision Machined
WR-06 Waveguide, D Band, 0.75" Bend Radius, 90° H-Plane Waveguide Bend, Precision Machined
WR-08 Waveguide, F Band, 0.75" Bend Radius, 90° E-Plane Waveguide Bend, Precision Machined
WR-08 Waveguide, F Band, 0.75" Bend Radius, 90° H-Plane Waveguide Bend, Precision Machined
WR-10 Waveguide, W-Band, 1.0" Bend Radius, 90° E-Plane Waveguide Bend, Non Anti-Cocking, Wellprice
WR-12 Waveguide, E-Band, 1.0" Bend Radius, 90° H-Plane Waveguide Bend, Non Anti-Cocking, Limited Run
WR-15 Waveguide, V-Band, 0.75" Bend Radius, 90° E-Plane Waveguide Bend, Non Anti-Cocking, Limited Run
WR-19 Waveguide, U-Band, 1.0" Bend Radius, 90° E-Plane Waveguide Bend, Non Anti-Cocking, Limited Run