- *By Application
- *Services
- Adapters & Transitions
- Amplifiers
- Antenna Feeds
- Antenna Measurement Systems & Accessories
- Antennas
- Attenuators
- Bias Tees
- Cable Assemblies
- Calibration Kits
- Corner Reflectors
- Couplers
- DC Blocks
- Detectors
- Faraday Isolators
- Ferrite Devices
- Filters
- Frequency Converters
- Frequency Multipliers
- Limiters
- Magic Tees
- Mixers
- Noise Sources
- Oscillators
- Phase Shifters
- Power Dividers
- Proxi-Flange™ Contactless Flange
- Radar Sensors
- Subassemblies
- Switches
- Termination Loads
- Test Equipment
- Balanced Harmonic Mixers
- Faraday Isolators
- Frequency Down Converters
- Frequency Extenders
- Frequency Up Converters
- Keysight PNA-X Noise Figure Extenders
- Noise Figure and Gain Test Extenders
- Phase Noise Analyzer Down-Converters
- Programmable/Direct Reading Attenuators
- Scalar Network Analyzer Extenders
- Spectrum Analyzer Harmonic Mixers
- VNA Frequency Extenders
- Test Hardware & Accessories
- TX/RX Modules
- Uni-Guide™ Waveguide Connector
- VNA Frequency Extenders
- Wave-Glide™ VNA Rail System
- Waveguide Sections
26 Products
Filter By
220 to 320 GHz, 10 dB ENR, WR-03 Waveguide, J-Band Noise Source with Faraday Isolator
220 to 270 GHz, 10 dB ENR, WR-03 Waveguide, J-Band Noise Source with Faraday Isolator
195 to 230 GHz, 15 dB ENR, WR-04 Waveguide, WR-04 Band Noise Source with Faraday Isolator
140 to 200 GHz, 12 dB ENR, WR-05 Waveguide, G-Band Noise Source with Faraday Isolator
90 to 140 GHz, 12 dB ENR, WR-08 Waveguide, F-Band Noise Source with Faraday Isolator, Limited Run
95 to 140 GHz, 13 dB ENR, WR-08 Waveguide, F-Band Noise Source with Faraday Isolator
75 to 110 GHz, 15 dB ENR, WR-10 Waveguide, W-Band Noise Source with TTL and Trigger Switch
65 to 116 GHz, 15 dB ENR, WR-10 Waveguide, W-Band Noise Source with TTL and Trigger Switch
75 to 116 GHz, 12 dB High ENR, WR-10 Waveguide, W-Band Noise Source with Faraday Isolator, Limited Run
75 to 110 GHz, 18 dB High ENR, WR-10 Waveguide, W-Band Noise Source with Faraday Isolator, Limited Run
75 to 110 GHz, 20 dB ENR, WR-10 Waveguide, W-Band Noise Source with TTL and Trigger Switch
60 to 90 GHz, 13 dB ENR, WR-12 Waveguide, E-Band Noise Source with Faraday Isolator, Limited Run
60 to 90 GHz, 20 dB ENR, WR-12 Waveguide, E-Band Noise Source with TTL and Trigger Switch
60 to 96 GHz, 20 dB ENR, WR-12 Waveguide, E-Band Noise Source with TTL and Trigger Switch
50 to 75 GHz, 20 dB ENR, WR-15 Waveguide, V-Band Noise Source with TTL and Trigger Switch
40 GHz to 60 GHz, 13 dB ENR, WR-19 Uni-Guide™ Waveguide, WR-19 Noise Source with TTL and Trigger Switch
33 to 50 GHz, 18 dB ENR, WR-22 Uni-Guide™ Waveguide, WR-22 Noise Source with TTL and Trigger Switch
33 to 50 GHz, 13 dB ENR, WR-22 Waveguide, Q-Band Noise Source with Faraday Isolator, Limited Run
26.5 to 40 GHz, 18 dB ENR, WR-28 Uni-Guide™ Waveguide, WR-28 Noise Source with TTL and Trigger Switch
500 MHz to 40 GHz, 18 dB ENR, 2.92 mm (M), 2.92 mm Coaxial Noise Source with TTL and Trigger Switch
500 MHz to 50 GHz, 18 dB ENR, 2.4 mm (M), 2.4 mm Coaxial Noise Source with TTL and Trigger Switch
500 MHz to 67 GHz, 18 dB ENR, 1.85 mm (M), 1.85 MM Coaxial Noise Source, Limited Run
500 MHz to 67 GHz, 18 dB ENR, 1.85 mm (M), 1.85 mm Coaxial Noise Source with TTL and Trigger Switch