- *By Application
- Adapters & Transitions
- Amplifiers
- Antenna Feeds
- Antennas
- Attenuators
- Bias Tees
- Cable Assemblies
- Calibration Kits
- Corner Reflectors
- Couplers
- DC Blocks
- Detectors
- Faraday Isolators
- Ferrite Devices
- Filters
- Frequency Converters
- Frequency Multipliers
- Limiters
- Magic Tees
- Mixers
- Noise Sources
- Oscillators
- Phase Shifters
- Power Dividers
- Proxi-Flange™ Contactless Flange
- Radar Sensors
- Subassemblies
- Switches
- Termination Loads
- Test Equipment
- Balanced Harmonic Mixers
- Faraday Isolators
- Frequency Down Converters
- Frequency Extenders
- Frequency Up Converters
- Keysight PNA-X Noise Figure Extenders
- Noise Figure and Gain Test Extenders
- Phase Noise Analyzer Down-Converters
- Programmable/Direct Reading Attenuators
- Scalar Network Analyzer Extenders
- Spectrum Analyzer Harmonic Mixers
- VNA Frequency Extenders
- Test Hardware & Accessories
- TX/RX Modules
- Uni-Guide™ Waveguide Connector
- VNA Frequency Extenders
- Wave-Glide™ VNA Rail System
- Waveguide Sections
9 Products
Filter By
SP4T PIN Diode Switches
9 Results
75 to 110 GHz, 30 dB Isolation, WR-10 Waveguide, W-Band Reflective SP4T Solid State Switch
69 to 77 GHz, 30 dB Isolation, WR-12 Waveguide, E-Band Reflective SP4T Solid State Switch
60 to 90 GHz, 30 dB Isolation, WR-12 Waveguide, E-Band Reflective SP4T Solid State Switch
55 to 65 GHz, 35 dB Isolation, WR-15 Waveguide, V-Band Reflective SP4T PIN Diode Switch
50 to 75 GHz, 35 dB Isolation, WR-15 Waveguide, V-Band Reflective SP4T PIN Diode Switch
26.5 to 40 GHz, 60 dB Isolation, 2.92 mm (F), Ka-Band Absorptive SP4T PIN Diode Switch
18 to 40 GHz, 60 dB Isolation, 2.92 mm (F), Broadband Absorptive SP4T PIN Diode Switch
18 to 26.5 GHz, 60 dB Isolation, 2.92 mm (F), K-Band Absorptive SP4T PIN Diode Switch
0.5 to 44 GHz, 60 dB Isolation, 2.92 mm (F), Broadband Absorptive SP4T PIN Diode Switch