- *By Application
- *Services
- Adapters & Transitions
- Amplifiers
- Antenna Feeds
- Antenna Measurement Systems & Accessories
- Antennas
- Attenuators
- Bias Tees
- Cable Assemblies
- Calibration Kits
- Corner Reflectors
- Couplers
- DC Blocks
- Detectors
- Ferrite Devices
- Filters
- Frequency Converters
- Frequency Multipliers
- Limiters
- Magic Tees
- Mixers
- Noise Sources
- Oscillators
- Phase Shifters
- Power Dividers
- Proxi-Flange™ Contactless Flange
- Radar Sensors
- Subassemblies
- Switches
- Termination Loads
- Test Equipment
- Balanced Harmonic Mixers
- Frequency Down Converters
- Frequency Extenders
- Frequency Up Converters
- Keysight PNA-X Noise Figure Extenders
- Noise Figure and Gain Test Extenders
- Phase Noise Analyzer Down-Converters
- Programmable & Manual Rotary Vane Attenuators
- Scalar Network Analyzer Extenders
- Spectrum Analyzer Down Converters
- Spectrum Analyzer Harmonic Mixers
- VNA Frequency Extenders
- White Noise Generators
- Test Hardware & Accessories
- TX/RX Modules
- Uni-Guide™ Waveguide Connector
- VNA Frequency Extenders
- Wave-Glide™ VNA Rail System
- Waveguide Sections
Test Instrumentation (Industry)
70 Results
15 dBi Gain, 110 to 170 GHz, 0.082" Diameter Circular Waveguide, D-Band Scalar Feed Horn Antenna
15 dBi Gain, 24 to 42 GHz, 35 dB Isolation, WR-28 Waveguide, Ka-Band Dual-Polarized Scalar Feed Horn Antenna
10 dBi Gain, 75 to 110 GHz, 40 dB Isolation, W-Band, WR-10 Dual-Polarized Choke Flange Feed Horn Antenna
75 to 110 GHz, 40 dB Isolation, 0.100" x 0.100" Square Waveguide Antenna Port, W-Band Orthomode Transducer
0.01 to 50 GHz, 32 dB Gain, +18 dBm P1dB, 6.0 dB Noise Figure, 2.4 mm (F), Broadband Amplifier
33 to 50 GHz, 30 dB Gain, 4.0 dB Noise Figure, In-line WR-22 Waveguide, Q-Band Low Noise Amplifier with Uni-Guide™
75 to 110 GHz, 25 dB Gain, +15 dBm P1dB, In-line WR-10 Waveguide, W-Band Power Amplifier
75 to 110 GHz, 23 dB Gain, +15 dBm P1dB, In-line WR-10 Waveguide, W-Band GaN Power Amplifier
DC to 110 GHz, 1 mm (M) to 1 mm (M), 3" Flexible, High Performance Coaxial Cable Assembly
DC to 50 GHz, 2.4 mm (M) to 2.4 mm (M), 12", Semi-Rigid, Coaxial Cable Assembly, Limited Run
50 to 75 GHz, +20 dBm Output Power, In-line WR-15 Waveguide, V-Band, X4 Active Frequency Multiplier
11 to 40 GHz, DC to 10 GHz IF, +15 dBm LO Power, 2.92 mm (F), Wideband Balanced Mixer
75 to 110 GHz RF, 3 to 6.1 GHz LO, DC to 1.3 GHz IF, WR-10 Waveguide, W-Band, 18th Harmonic Mixer
60 to 90 GHz, DC to 12 GHz IF, +10 dBm LO Power, WR-12 Waveguide, E-Band Externally Biased Quadrature Mixer
50 to 75 GHz, 35 dB Isolation, WR-15 Waveguide, V-Band Reflective SP4T PIN Diode Switch
60 to 90 GHz, 30 dB Isolation, WR-12 Waveguide, E-Band Reflective SP4T Solid State Switch
60 to 90 GHz, 25 dB Attenuation, WR-12 Waveguide, E-Band Electrical Attenuator
0.5 to 43 GHz, 60 dB Isolation, 2.92 mm (F), Broadband Absorptive SPDT PIN Diode Switch
60 to 90 GHz, 25 dB Isolation, WR-12 Waveguide, E-Band Reflective SPST PIN Diode Switch
DC to 40 GHz, 70 dB, 10 dB Step Size, 2.4 mm Female Coaxial Programmable Attenuator
110 to 170 GHz RF Input, 10 MHz to 1.6 GHz IF Output, WR-06 Waveguide, D-Band Down-Converter
140 to 220 GHz, 20 dB Isolation, 5.0 dB Insertion Loss, WR-05 Waveguide, G-Band Faraday Isolator
75 to 110 GHz, 28 dB Isolation, 1.5 dB Insertion Loss, WR-10 Waveguide, W-Band Faraday Isolator
DC to 67 GHz, 1.85 mm NMD (F) to 1.85 mm (F), 25", Flexible, Armored VNA Test Cable, Limited Run
WR-05, G-Band, 140 to 220 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-06, D-Band, 110 to 170 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-08, F-Band, 90 to 140 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-10, W-Band, 75 to 110 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-12, E-Band, 60 to 90 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-15, V-Band, 50 to 75 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-19, U-Band, 40 to 60 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-22, Q-Band, 33 to 50 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-28, Ka-Band, 26.5 to 40 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-34, 22 to 33 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
WR-42, K-Band, 18 to 26.5 GHz, Vector Network Analyzer Waveguide Calibration Kit with Proxi-Flange™ Contactless Flange
75 to 110 GHz, 10 dB Coupling, 40 dB Directivity, WR-10 Waveguide, W-Band, 4-Port Dual-directional Directional Coupler
600 mm (23.6"), Grooved Anti-Cocking Flange, WR-22 Flexible Twistable Waveguide Section (Flexguide)
40 to 60 GHz, 20 dB Coupling, 20 dB Directivity, WR-19 Waveguide, U-Band, 4-Port Waveguide Crossguide Coupler